Bertazzoni Range Clicking Noises: What's Normal and What's Not?

In this article
Hearing clicking noises from your Bertazzoni range? A gas burner sparking during ignition or an oven ticking as it heats can be normal.
Constant clicking, especially when the burners are off or won't light, needs attention. When the clicking happens and what type of range you have can help narrow down the cause.
On a dual-fuel Bertazzoni range, the gas cooktop and electric oven can click for different reasons. Check your model's manual: ignition features, controls, and expected sounds vary.
When Bertazzoni Range Clicking Is Normal
These sounds can be part of normal operation, depending on your model:
- A few clicks at ignition: A gas burner's spark igniter clicks while lighting the flame. Several igniters may spark together even when you turn on only one burner.
- Brief automatic reignition: Some gas cooktops spark again if a flame goes out. Repeated attempts or a flame that will not stay lit need attention.
- Occasional oven clicks: Relays may click as they switch heat on and off.
- Ticks during heating or cooling: Metal parts expand and contract as their temperature changes.
On most gas cooktops, clicking stops once the burner lights and the knob is moved out of the ignition position. Follow your Bertazzoni model's manual for selecting the cooking setting.
Why Your Bertazzoni Gas Burners Keep Clicking

Persistent gas-range clicking can have several causes:
- Moisture: Spills or cleaning can interfere with ignition and may cause continued sparking after a burner lights.
- Food residue: Debris near burner ports can interfere with ignition or flame formation.
- A misplaced burner cap: An incorrectly seated cap may keep the burner from lighting properly or cause an uneven flame.
- An ignition fault: A faulty switch, spark module, or wiring can cause repeated clicking, including with the knobs off.
Drying the surface may help with light moisture, but liquid inside the controls requires professional attention.
A technician experienced in Bertazzoni appliance repair should test suspected faulty components before deciding what needs replacing.
If a burner fails to light, turn its knob off promptly as directed by the manual. Do not keep trying to ignite it or leave gas flowing.
Our guide to why a gas range isn't igniting explains other possible causes, including gas-supply problems. Read the safety guidance below before considering any surface checks.
Clicking From a Bertazzoni Electric Oven or Range
An electric oven does not use a gas spark igniter. That includes the oven in a dual-fuel range, even though its cooktop uses gas.
Depending on your Bertazzoni model, heating controls may click as relays switch power to elements. Occasional cycling with normal heating can be expected; it is different from a gas burner that keeps sparking.
Pay attention to rapid, persistent, or newly loud clicking alongside:
- Poor heating or overheating.
- Unexpected shutoffs.
- A display or controls that behave unpredictably.
The problem could involve a relay, control board, wiring, or power supply. The clicking sound alone won't reveal which part is responsible.
If your range control panel won't respond, note any displayed error code for the technician. Do not open the appliance or test electrical parts.
Safe Checks and Warning Signs
Warning Signs: Stop Before Troubleshooting
If you smell gas, leave the building immediately. Do not attempt ignition, operate appliance controls or electrical switches, use a phone inside, or continue troubleshooting.
Call your gas utility or emergency services from a safe location outside. Clicking alone does not prove there is a leak, but a gas odor takes priority over any checks.
Stop using the range and arrange professional help for:
- Burning odors or abnormal sparking outside normal burner ignition.
- Unpredictable heating or operation you cannot stop normally.
- Persistent clicking with all controls off.
For smoke, fire, or immediate danger, leave and call emergency services from a safe location. Do not attempt routine cleaning under these conditions.
Safe Surface Checks
Only consider these checks if there are no warning signs and the issue followed light surface soiling or cleaning. Follow your Bertazzoni model's owner's manual throughout.
- Turn off and cool down. Let the appliance cool completely before touching burner parts.
- Safely isolate power. Follow the manual's instructions. The Off setting alone does not disconnect electricity. If isolation requires moving the range or accessing a panel, leave the work to a professional.
- Check cap placement. Reposition only accessible, user-removable burner caps as the manual directs.
- Clean accessible surfaces. Use the manufacturer's approved method for visible residue. Do not probe ignition parts or dismantle components.
- Let parts dry fully. Reassemble as instructed. Do not use a hair dryer, flame, or other heat source.
If moisture may have reached the controls, contact a professional rather than restarting the range. If safe surface care does not resolve the clicking, stop troubleshooting.
Do not pull the range out, open electrical panels, test live components, or attempt gas or ignition-electronics repairs.
For general oven care beyond ignition issues, see how to clean an oven. Use only methods approved in your Bertazzoni manual. Oven-cavity cleaning will not fix a cooktop igniter problem.
When to Call for Bertazzoni Range Repair
Arrange diagnosis if your Bertazzoni range keeps clicking, a burner will not ignite, or heating and controls become unreliable. Keep the range out of use when the warning signs above are present.
A qualified technician can inspect the ignition system, switches, wiring, and controls. A household electrical-supply fault may require an electrician.
Before your appointment, note what you have already observed:
- When the clicking happens and whether its sound has changed.
- Whether it started after cleaning or a spill.
- Any displayed error code.
Do not recreate the fault to demonstrate it. For local help, see our Los Angeles appliance repair services.
