Maytag dryer not heating
Usually a blown thermal fuse or failed heating element
A Maytag dryer that tumbles but stays cold is one of the most common laundry calls we get. We check the entire heating circuit and airflow path to find the break.
How we fix it
- We test the heating element and thermal fuse, which trips when the vent is restricted.
- The cycling thermostat and thermal cutoff are checked for continuity.
- We clear the lint screen, vent, and ducting, since blocked airflow is a leading cause of no heat.
With heat restored, your Maytag dries full loads in a single cycle again.
Maytag washer won't spin or drain
Often a worn drive belt, bad lid switch, or clogged pump
When the cycle ends and your clothes are still dripping, the drain and spin system is the place to look. We trace it from the pump to the motor.
How we fix it
- We test the lid switch or door lock, since a failed switch stops the spin entirely.
- The drive belt, motor coupling, and clutch are inspected for wear and slippage.
- The drain pump and hose are cleared of lint, coins, and debris causing standing water.
Most spin and drain issues on these durable machines are straightforward fixes.
Maytag washer is loud or shakes during spin
Commonly worn bearings, suspension, or an unbalanced load
A washer that bangs and walks across the floor is more than annoying, it speeds up wear. We track down the source of the noise and vibration.
How we fix it
- We check the tub bearings and seals, a common wear point on high-mileage machines.
- Suspension rods, springs, and shock absorbers are inspected and replaced if tired.
- We confirm the machine is level and the load balances properly during spin.
A quieter, steadier spin protects your floors and extends the machine's life.
Maytag refrigerator not cooling
Often dirty coils, a failed fan, or a faulty defrost system
When your Maytag fridge drifts warm, food safety is on the line. We work through the cooling system to find what is keeping it from holding temperature.
How we fix it
- We clean the condenser coils, which choke on dust and pet hair over time.
- The evaporator and condenser fans are tested for proper operation.
- The defrost system is checked, since frost buildup blocks cold airflow to the fridge.
We get the temperature stable so your food stays safe and fresh.
Maytag oven not heating evenly
Usually a failed bake element or temperature sensor
Burned edges and undercooked centers point to a heating problem. We figure out whether it is the element, the sensor, or the control.
How we fix it
- We test the bake and broil elements for continuity and visible damage.
- The oven temperature sensor is checked for accuracy and replaced if it reads wrong.
- We verify the control board is firing the heating cycles correctly.
Once calibrated, your Maytag oven bakes and roasts evenly again.
Maytag dishwasher not cleaning or draining
Often clogged spray arms, a tired filter, or a blocked drain
Dishes coming out dirty or water left standing in the tub both point to flow problems. We clean and test the water path from end to end.
How we fix it
- We clear the spray arms and filter of food debris that blocks water flow.
- The drain hose and pump are inspected for clogs causing standing water.
- The water inlet valve is tested to confirm the unit fills with enough water.
With proper water flow restored, your dishes come out clean and dry.
